Tissue Cell Culture Products from MIDSCI

Stat Fax 2100 Microplate Reader

Features:

• Fully automatic.
  
• Bichromatic optics
  
• On board data reduction calculations include regressions, curve fitting, and cutoff absorbance calculations with step-by-step user prompting.
  
• Includes parallel and serial outputs.
  
• Large, non-volatile memory stores at least 50 user entered tests.

  Photometric
  Linear Measurement Range:      - 0.20 to 3.0 Absorbance Units (A)
  Photometric Accuracy:          1% or better
  Stability:                     Drift of no more than 0.005A in 8 hours
  Light Source:                  Tungsten lamp, with lamp saver feature
  Wavelengths:                   Standard - 405, 450, 492, and 630nm
                                 6-VIS - 405, 450, 492, 545, 600, and 630nm
                                 6-UV - 340, 405, 450, 492, 545, and 630nm
  Type of Filter:                Multiple-cavity hard coat interference, 10nm half bandpass
  Vessel:                        Standard 96-well microtiter plates or strip trays
  

  Electronics
  Display:                       Two-line LCD, alphanumeric, 24 characters per line
  Printer Requirements:          Parallel or serial, 80 column, 2K byte minimum
                                 buffer capacity, EPSON compatible
  Keyboard:                      29-key, domed membrane switch, enunciating
  Power Requirements:            115V/230V, 50/60Hz (switch selectable)
  Serial Port:                   2400 baud, 1 start bit, 8 data, 1 stop, no parity
  Microprocessor:                Z80A or Z180
  Non-Volatile Memory:           Battery supported RAM, holds approx. 50 tests and curves
  

  Software
  Speed:                         Reads and prints absorbances of 96 wells in about 2 minutes
  Calculation Modes:             Single-point calibration, uptake mode, point to point
                                 curve fit, polynomial regression, linear regression (log 
                                 & linear), cutoff absorbance, multipoint % absorbance
  Additional Features:           Complete user prompting, flags and error messages, 
                                 partial plate reading, alphanumeric test naming, auto-
                                 matic interpretation options, duplicate options, clock
                                 and calendar, controls locator, self-check system, curve 
                                 plotting and editing
  

  Other
  Mixer:                         Variable time, fixed speed
  Enclosure:                     Fire-retardant ABS plastic cover with metal base
  Dimensions:                    17” x 14.5” x 7”
  Weight:                        30lbs.
  Certifications:                UL Listed, CE Mark available
  

Click here for more information and online ordering

MIDSCI is a full-service provider of Laboratory Equipment and Supplies, with an emphasis on life science and Biotechnology research. In addition to Tissue Cell Culture Plastics for Tissue Cell Culture work, we also have a complete line of related products for Tissue Cell Culture such as Centrifuges, Cryogenics, Filtration, Medias, Refrigerators, Freezers, Water-Jacketed Incubators, Serum, ELISA/Immuno/AssayEIA/RIA Microplates, Hoods, Shakers, Gloves, Pipet Aids, basically most any product for Tissue Cell Culture.

 Tissue Culture Products | Related Products | Tissue Culture Information & Protocols

MIDSCI Home Page | Contact Us